- This tab is used to assign a driver to an IR port, and choose the device functions for the selected port. Buttons for the selected functions are displayed and usable in the GlobalViewer ® interface. If you change the port to be a serial port, the Serial Configuration tab opens, allowing you to associate a serial driver.
- Click Create a new port. Select Local Port for Type of port. In the Port Name box, type the path to the printer in the following format, where server is the name of the print server and printer is the share name of the printer (e.g. Server printer). Select the printer model and driver.
- USB drivers for Windows 3.1 Port Devices All other trademarks, logos and brand names shown on this website other than stated are the sole property of their respective companies and are not owned by oemdrivers.com. Information on the oemdrivers.com may not be duplicated without permission. Oemdrivers.com is not responsible for any damages.
Some devices will only connect to your computer using a port called 'RS232 Serial Port'. This port was used on old computers before 2003.
Go to Device Manager (right click on My Computer, choose Manage and then find Device Manager in the left panel), or right click on Start Menu for Windows 10 and select Device Manager 3. Usb Port Driver free download - USB Audio ASIO Driver, VIA USB 2.0 Host Controller Driver, EOCP Driver for Sony Eyetoy USB Camera, and many more programs.
RS232 was the universal/popular port back in the old days just like USB is today.
In short, all you need to know is...
Modern computers no longer have RS232 port (extinct just like VGA port is). So all you need to get is a RS232-to-USB converter. It's about $5 on eBay. Just search for: rs232 usb
When you buy it, you'll need to install it to Windows-based computer. Here's how...
| Step 1: |
Connect RS232 device into any USB port on your laptop/computer. Allow 20+- seconds for Windows to attempt to install drivers automatically.
If it's successful, skip to Step 2 below.
However in 95% of cases, it will fail to automatically install the drivers. So you have to install drivers manually.
Here's how...
1) Disconnect RS232 device from your computer.
2) Install both driver packs below...
- Driver Pack 1
- Driver Pack 2
- Driver Pack 3
3) Restart your computer.
4) Connect RS232 device into any USB port. This time Windows will auto-install the drivers. You can verify a correct install going to Device Manager. Here's how...
Windows Vista/7/8/10:
Control Panel » System » Device Manager
Windows XP:
Control Panel » System » 'Hardware' tab » Device Manager
You should see something like this:
If install STILL failed to install the drivers or above 'Prolific...' device has a yellow triangle next to it, then: Install the driver file from the disc that came with the RS232 Device.
| Step 2: |
Stallion Port Devices Driver Vga
Verify RS232 device is connected to COM PORT number between 1 to 4. This is a MUST, else it will not work.
Here's how to do this...
Stallion Port Devices Driver Updater
Right-click on 'Prolific...' device in Device Manager and click on 'Properties'. As seen below. Then:
That's it! It's now working 100% as it should. |